30-Day Returns • Fast Dispatch • Free UPS Shipping

Categories
Chip Tuning Basics

How Much Horsepower Does a Tune Add?

How much horsepower a stage 1 tune adds on turbo, naturally aspirated and hybrid engines — with real before-and-after dyno results and what changes the number.

Updated October 2026

It depends most on one thing: whether the engine is turbocharged. A stage 1 tune on a turbo engine can raise boost, so it gains the most. On a naturally aspirated engine the tune can only refine fuel and ignition timing, so the gain is smaller.

With Monte, a plug-in stage 1 tuner:

Engine type Monte gain (up to)
Turbocharged up to 20% more power
Naturally aspirated up to 12%
Hybrid up to 10%

For your exact engine, the catalogue shows the factory rating and our estimate for that engine.

Real dyno results

What Monte measured on a chassis dyno, before and after:

Car Engine Gain Source
Ford F-150 Raptor 3.5 EcoBoost (turbo) +21 hp, +31 lb-ft Lab test, SEMA Garage, Diamond Bar, CA
Mercedes C300 2.0 turbo +25.1 hp, +72.2 lb-ft Dyno on video
Nissan 370Z 3.7 V6 +22.3 hp, +16.8 lb-ft Dynocom customer dyno report
Mazda MX-5 2.0 +16.6 hp, +17.1 lb-ft Dynocom customer dyno report

Note the torque: on the turbo C300, torque rose far more than horsepower. That’s typical for turbo engines — it’s the mid-range pull you feel when you accelerate.

Why turbo engines gain more

A turbo engine’s power is limited by how much boost the factory allows. The hardware usually has margin, so a calibration that raises boost a little, with fuel and timing to match, adds noticeable power and torque. A naturally aspirated engine has no boost to raise: the tune can only fine-tune fuel and timing, so gains are smaller in absolute terms.

Turbo diesels respond mostly with torque. Diesel tuner →

What changes the number on your car

  • The engine. Turbo vs naturally aspirated matters most; then displacement and how conservative the factory calibration is.
  • Fuel. Higher octane lets the tune use more ignition timing. A tune set for premium gains less on regular.
  • Temperature and altitude. Hot, thin air means less power, with or without a tune.
  • Engine condition. Worn plugs, a dirty air filter or a boost leak cost power before the tune adds any.
  • How it’s measured. A chassis dyno measures at the wheels, which reads lower than the factory rating at the crank. Compare before-and-after on the same dyno. What is a dyno? WHP vs HP →

Stage 1 vs stage 2 gains

Stage 1 is software on a stock engine. Stage 2 adds parts — intake, exhaust or downpipe, intercooler — and a tune written for them, so it gains more but costs more and is harder to undo. What is a stage 2 tune? → · Other ways to add horsepower →

When will you feel it?

Monte installs in about 5 minutes. The ECU then needs about 120 miles of normal driving to adapt to the new calibration before you see the full effect.

FAQ

How much hp does a stage 1 tune add? It depends on the engine. Monte is rated up to 20% on turbo engines, up to 12% on naturally aspirated and up to 10% on hybrids; on our dyno tests it added 16.6–25.1 hp.

How much horsepower does a tuner add to a turbo car? More than to a naturally aspirated one, because the tune can raise boost. Monte: up to 20%; +25.1 hp and +72.2 lb-ft on a Mercedes C300 2.0 turbo.

How much hp does a tune add to a naturally aspirated engine? Less — up to 12% with Monte. On a Nissan 370Z 3.7 V6 we measured +22.3 hp.

Why is my dyno number lower than the factory rating? A chassis dyno measures at the wheels; the factory rating is at the crank. Compare before and after on the same dyno.

What is a stage 1 tune? A calibration change on a stock engine — fuel, ignition timing and, on turbo engines, boost — with no new parts. More →